Kirjeldus
Ajax FireProtect Jeweller. Detector type: Photoelectrical reflection detector, Connectivity technology: Wireless, Product colour: Black. Power source: Battery, Battery voltage: 3 V. Width: 132 mm, Depth: 31 mm, Height: 132 mm. Quantity per pack: 1 pc(s). Compliance certificates: CE
FireProtect
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.
Registers smoke and sharp jumps in temperature in the room
Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
Independently tests the smoke chamber and gives prompt notification of the need to dust
Principle of operation
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
Features
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
- Authentication to prevent forgery
- Jamming detection and communication channels encryption
- Tampering alarm
