TP-Link PoE+ ports 6 — lüliti

161,05 €

MAC-aadresside tabel: 4000 entries · Edastamise kiirus: 14.88 Mpps · Lülitusvõime: 20 Gbit/s

Laos — kohal 1-5 tööpäeva

18 laos

Maksa kolmes võrdses osas 3 x 53.68€

Tootekood: 1420749 Kategooria:

Kirjeldus

TP-Link 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 10. MAC address table: 4000 entries, Switching capacity: 20 Gbit/s. Networking standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. Power over Ethernet (PoE)

Overview
TL-SG1210PP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

Power Over Ethernet
8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8.

Overload Arrangement
TL-SG1210PP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Intelligent Power Management
Priority (port 1 > port 2 ……> port 8): This function will help protect the system when the system power is overloaded. For example, port 3, 4, 5 and 6 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 1 with 35 W, and then the system will cut off the power of port 6 because of the overloaded power, this means port 3, 4 and 5 will use 25 W respectively and port 1 will use 35 W, no power will be supplied to port 6.

Highlight Performance
• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-4.
• Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive applications
• Isolation Mode allows one-click client traffic separation for higher security and performance
• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-8. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.

TL-SG1210PP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+ and 2-Port PoE++ TL-SG1210PP is a great selection for expanding your network.

  • 9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 Port
  • With 2× PoE++ ports and 6× PoE+ ports, transfers data and power on one single cable
  • Works with IEEE 802.3af/at/bt compliant PDs
  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic
  • Supports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ port
  • Supports PoE Power up to 123 W for all PoE ports*
  • Plug and Play, no configuration and installation required
  • Up to 250m data and power transmitting range under Extend Mode**
  • PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
  • Isolation Mode allows one-click client traffic separation for higher security and performance
  • Priority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2

Üldine

NameNET SWITCH 10PORT 6POE+ 2POE++/TL-SG1210PP TP-LINK

Andmeedastus

Ladusta-ja-edastaYes
MAC-aadresside tabel4000 entries
Edastamise kiirus14.88 Mpps
Lülitusvõime20 Gbit/s

Disain

LED-indikaatoridYes
Korpuse materjalSteel
Toote värvBlack
PüstikmontaažNo

ELKO Verified Logistics Data

Ühiku kõrgus24 cm
Ühiku sügavus32 cm
Ühiku laius7 cm

Juhtimisfunktsioonid

Teenusekvaliteedi (QoS) tugiYes
Lüliti tüüpUnmanaged

Kaal ja mõõtmed

Kõrgus26 mm
Sügavus126 mm
Laius209 mm

Logistika andmed

Harmonized System (HS) kood85176990

Pakendi andmed

Pakendi tüüpBox

Pakendi sisu

KasutusjuhendYes
Kaablid kaasa arvatudAC

Pesad & liidesed

Kombineeritud SFP-pesade arv1
Gigabitise Etherneti (vask) portide arv10
RJ-45 Etherneti ühenduse pesade tüüpGigabit Ethernet (10/100/1000)
RJ-45 Etherneti ühenduse pesade arv10

Sertifikaadid

SertifikaatFCC, CE, RoHS

Toimimine

Ilma ventilaatoritaYes

Turvalisus

IGMP-jälgimineYes

Töötingimused

Soojuse hajumine482.17 BTU/h
Suhteline õhuniiskus (H-H) hoiustamisel5 - 90%
Suhteline õhuniiskus kasutamisel (H-H)10 - 90%
Hoiustamistemperatuur (T-T)-40 - 70 °C
Kasutamistemperatuur (T-T)0 - 40 °C

Võimsus

Elektritarbimine (max)144.1 W
Sisendpinge53.5 V
Sisendvool2.43 A
AC-sisendsagedus50 Hz
AC-sisendpinge90 - 220 V
Toiteallikate arv1
Kaasas toiteplokkYes
ToiteallikasDC/PoE

Võrgustumine

Auto MDI/MDI-XYes
Automaatne ühildumineYes
Automaatse MAC-aadressi aegumise tugiYes
Automaatse MAC-aadressi tuvastamise tugiYes
Voo reguleerimise tugiYes
Toetatud kaablitüübidCat3, Cat4, Cat5, Cat5e
Etherneti vaskkaablite tehnoloogia10BASE-T, 100BASE-TX
10G-tugiNo
VõrgustandardidIEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Garantii60 kuud
EAN4895252500349
Tootja koodTL-SG1210PP

Lisainfo

Kaal 1,63 kg
Mõõtmed 32 × 7 × 24 cm
PoE

123 W, 2, 6, Yes

Mudel

TL-SG1210PP